(dimensions in inches)
Bearing Type - DPPxx
Bore Dia (d) - 0.3750
Outer Dia (D) - 1.4375
Outer Width (Bo) - 0.7940
Inner Width (Bi) - 0.8700
Dynamic Load Rating (Cr) - 8,120
Static Load Rating (Cor) - 15,760
Max. Shaft Shoulder Dia. Inner (Li) - 0.6
Ball Qty - 20
Ball Dia (Dw) - 0.2810
Max. shaft corner radius, or 45 deg. chamfer (ch1) - 0.015
Max. housing corner radius, or 45 deg. chamfer (ch) - 0.032
Material - 52100 Chrome steel or equivalent
The dynamic load rating given is for outer race rotation. The dynamic load rating for inner race rotation is 9690 pounds.
The static thrust load rating is 5300 pounds.
The bore diameter tolerance is +.0000 / -.0005".
The outside diameter tolerance is +.0000" / -.0005".
The tolerance for the inner race width and the outer race width is +.000" / -.005"
The load ratings listed for these bearings are determined by the formulas used specifically for airframe bearings. These ratings are not equivalent to ratings calculated from the ABMA formulas used for most antifriction bearing products.
This bearing is intended for commercial applications. You must notify the AST sales department contact at the time of your inquiry if the bearing will be used in an airworthy application.
The bearing has two removable seals made of woven fabric Teflon.
Hot number:FAG 29334 FAG 6306 NKE 32206 NTN 6212 KOYO AXZ 5,5 5 13 NKE RSHE30-N INA RA104-NPP SKF SCF25ES CX TUW1 16 FAG GE-110ES-2RS SKF HW-9/16 McGill MR-22 SKF 60x110x8 HMSA10 RG SNR 60/28 NOK JASO 1013 5
Previous:DPP5 深沟球轴承 ---- Next:DPP8 深沟球轴承
Return to AST轴承型号查询