(dimensions in inches)
Bearing Type - KPxxA
Bore Dia (d) - 0.7500
Outer Dia (D) - 1.6250
Outer Width (Bo) - 0.3750
Inner Width (Bi) - 0.4370
Dynamic Load Rating (Cr) - 5,320
Static Load Rating (Cor) - 8,790
Max. Shaft Shoulder Dia. Inner (Li) - 0.9
Ball Qty - 16
Ball Dia (Dw) - 0.2340
Max. shaft corner radius, or 45 deg. chamfer (ch1) - 0.015
Max. housing corner radius, or 45 deg. chamfer (ch) - 0.032
Material - 52100 Chrome steel or equivalent
The dynamic load rating given is for outer race rotation. The dynamic load rating for inner race rotation is 5980 pounds.
The static thrust load rating is 3900 pounds.
The bore diameter tolerance is +.0000 / -.0005".
The outside diameter tolerance is +.0000" / -.0005".
The tolerance for the inner race width and the outer race width is +.000" / -.005"
The load ratings listed for these bearings are determined by the formulas used specifically for airframe bearings. These ratings are not equivalent to ratings calculated from the ABMA formulas used for most antifriction bearing products.
This bearing is intended for commercial applications. You must notify the AST sales department contact at the time of your inquiry if the bearing will be used in an airworthy application.
The bearing has two removable seals made of woven fabric Teflon.
Hot number:NTN 7313 B/DT NACHI 3207 A-RS STEYR 53334 U NSK NUP 211 ET OKB 665796 SNR 7034HVDUJ74 Timken 510072 ISB 6219 NSK 6913N IKO TA 1920 Z FYH UCPH205-14 FAG N-214 RHP RMS-231/2-L SKF NUP 307 ECJ NSK 6328
Previous:KP10A 深沟球轴承 ---- Next:KP16A 深沟球轴承
Return to AST轴承型号查询