CONSOLIDATED MR-64-2RS轴承,CONSOLIDATED MR-64-2RS滚针轴承 -搜轴承CONSOLIDATED数据中心
搜轴承 -- CONSOLIDATED轴承型号查询 -- 滚针轴承 -- CONSOLIDATED MR-64-2RS轴承
Dimensions (inch)F4.0000

Without Inner Race & 2 Seals 2RS

D5.0000
B2.0000
Approx.
Wgt. lbs
3.615
Appropriate Inner RaceMI-56
InterchangeMcGillMR-64-SS
RBC-
Torrington-
1) Material - Outer races, inner races and rollers are made from 52100 steel and hardened to Rockwell hardness 60-64 RC. These bearings are equipped with stamped steel cages.
2) Lubrication - Outer races have an external centered oil groove and one oil hole. Inner races have an internal centered oil groove and one oil hole.
3) For applications where the bearing is run directly on the shaft, no inner race is required. The shafthardness should be 60 Rockwell C scale.
4) In order to adapt the seals, a narrow roller is used. Therefore, the load ratings are equivalent to the narrow type - i.e. MR-16-2RS load equal to MR-16 N.
订购 CONSOLIDATED MR-64-2RS 请填写如下信息

标题:

主要内容:

验证码:

Hot number:SKF 7217 B/DT NACHI 7219 B/DT SKF * NJ 222 ECP OKB CX 240/530 K30CW33+AH240/530 ISO 7040 CDT INA CSCF065 ISO GE20AW CX LM06OP NKE NJ2230-E-MPA RBC MR-10-2RS SKF 7310 BEGBP SKF KMFE 16 H SKF NU 328 ECM SKF SONL 238-538