| Dimensions (inch) | d | 4.1250 | ![]()
|
| F | 2.1250 | ||
| d1 | 3.3750 | ||
| A | 13.7500 | ||
| C | 3.8750 | ||
| E | 11.0000 | ||
| H | 4.0000 | ||
| H1 | 7.7500 | ||
| Housing Only Approx. Wgt.lbs | 32.400 | ||
| Triple Seals Req'd / Seal No. (a) | LER 112 | ||
| Triple Seals Req'd / Seal Qty. (a) | 1 | ||
| Triple Seals Req'd / Seal No. (b) | LER 191 | ||
| Triple Seals Req'd / Seal Qty. (b) | 1 | ||
| Stabilizing Rings Req'd / No. | SR-18-15 | ||
| Stabilizing Rings Req'd / Qty. | 1 | ||
| Appropriate End Plug | EPR-11 | ||
| Lockwasher | W-18 | ||
| Locknut | AN-18 | ||
| Suitable for Bearings | 22218 | ||
| Interchange | SKF | SAF 218 | |
| Torrington | SAF 218 | ||
| * Also available in four-bolt base. Use "FSAF" prefix. Example: FSAF-317. 1) The above are split cast iron housings. For cast steel housings use "SAFS" prefix. Example: SAFS-317. 2) Sizes SAF-222 and larger & sizes SAF-318 and larger are all four-bolt base units. 3) Taconite seals ( TER-..V ) can be used in place of the standard LER seal. Example: TER-17V replaces LER-17 4) Please verify that the design listed above is the design you require. Designs of various manufacturers may be different than the design listed above. 4) Parts may not be interchangeable with parts from other manufacturers. | |||
Hot number:MRC 71938 C SNR 7030 AC NACHI 7207 AC NTN 7336 AC OKB 90203G NACHI 103TAD20 FAG 24126-E1-K30 + AH24126 NACHI 62/22N CX 65225/65500 SNR EXF215 ISO GE750DO FAG NNU4940-S-K-M-SP SKF SA45ES-2RS SNR UKFC213H FAG 240/600
Previous:SAF-217 轴承座 ---- Next:SAF-220 轴承座
Return to CONSOLIDATED轴承型号查询