| Dimensions (inch) | d | 4.8750 | ![]()
|
| F | 2.7500 | ||
| d1 | 4.1875 | ||
| A | 16.5000 | ||
| C | 4.7500 | ||
| E | 13.5625 | ||
| H | 4.9375 | ||
| H1 | 9.6250 | ||
| Housing Only Approx. Wgt.lbs | 53.000 | ||
| Triple Seals Req'd / Seal No. (a) | LER 121 | ||
| Triple Seals Req'd / Seal Qty. (a) | 1 | ||
| Triple Seals Req'd / Seal No. (b) | LER 113 | ||
| Triple Seals Req'd / Seal Qty. (b) | 1 | ||
| Stabilizing Rings Req'd / No. | SR-22-19 | ||
| Stabilizing Rings Req'd / Qty. | 1 | ||
| Appropriate End Plug | EPR-14 | ||
| Lockwasher | W-22 | ||
| Locknut | AN-22 | ||
| Suitable for Bearings | 22222 | ||
| Interchange | SKF | SAF 222 | |
| Torrington | SAF 222 | ||
| 1) The above are split cast iron housings. For cast steel housings use "SAFS" prefix. Example: SAFS-317. 2) Sizes SAF-222 and larger & sizes SAF-318 and larger are all four-bolt base units. 3) Taconite seals ( TER-..V ) can be used in place of the standard LER seal. Example: TER-17V replaces LER-17 4) Please verify that the design listed above is the design you require. Designs of various manufacturers may be different than the design listed above. 4) Parts may not be interchangeable with parts from other manufacturers. | |||
Hot number:OKB 407Z2 ISO 1202 SKF 1206 ETN9 NSK 24138SWRCg2E4 CX 53418U+U418 NTN E-4R15002 CX TUP2 40.30 SKF 7316BMG SKF AH-3038x180 INA KA-100XPO STEYR N-214 SKF 11050 SKF FYT 25 TF/VA228 SKF GAC 35 F NSK 6312-Z
Previous:SAF-220 轴承座 ---- Next:SAF-224 轴承座
Return to CONSOLIDATED轴承型号查询