| Dimensions (inch) | d | 9.5625 | ![]()
|
| F | 5.2500 | ||
| d1 | 8.3125 | ||
| A | 32.7500 | ||
| C | 8.7500 | ||
| E | 26.3125 | ||
| H | 9.5000 | ||
| H1 | 18.6250 | ||
| Housing Only Approx. Wgt.lbs | 431.000 | ||
| Triple Seals Req'd / Seal No. (a) | LER 179 | ||
| Triple Seals Req'd / Seal Qty. (a) | 1 | ||
| Triple Seals Req'd / Seal No. (b) | LER 170 | ||
| Triple Seals Req'd / Seal Qty. (b) | 1 | ||
| Stabilizing Rings Req'd / No. | SR-44-38 | ||
| Stabilizing Rings Req'd / Qty. | 1 | ||
| Appropriate End Plug | EPR-24 | ||
| Lockwasher | W-44 | ||
| Locknut | N-44 | ||
| Suitable for Bearings | 22244 | ||
| Interchange | SKF | SAF 244 | |
| Torrington | SAF 244 | ||
| 1) The above are split cast iron housings. For cast steel housings use "SAFS" prefix. Example: SAFS-317. 2) Sizes SAF-222 and larger & sizes SAF-318 and larger are all four-bolt base units. 3) Taconite seals ( TER-..V ) can be used in place of the standard LER seal. Example: TER-17V replaces LER-17 4) Please verify that the design listed above is the design you require. Designs of various manufacturers may be different than the design listed above. 4) Parts may not be interchangeable with parts from other manufacturers. | |||
Hot number:INA HF2520 OKB NK110/30 NACHI E32038J NTN NAO-45×62×40ZW Timken NAO17X35X16 SKF NJ230ECM ISO NUP2328 ISO SA201 SKF SYFWK 1.1/2 LTHR CX TUP1 120.60 SKF (Old No.) AS75100 INA GE-30ES-2RS NHBB SSRI-418ZA62 SKF SAF 1518 TLC NOK 1BP-29.5
Previous:SAF-240 轴承座 ---- Next:SAF-50917/16..BALL 轴承座
Return to CONSOLIDATED轴承型号查询